Floor Sanding and Polishing – How to Choose a Floor Sander and Polisher
There are many benefits of floor sanding and polishing, and you may even decide to do it yourself. Before you start, however, you should learn how to choose a floor sander or polisher; contact a floor sander or polishing company for free quotes and advice to ensure a smooth floor sanding process. It will save you time and money in the long run.
Taking on the DIY approach to floor sanding and polishing
If you plan to sand and polish your floor, here are some tips to help you do it right. First, you must clean the area you intend to work on thoroughly. You should also contain the work area and ensure that you inform others about your work. Ensure to keep pets and small children away from the area where you are working. It would help if you also were sure to buy the correct tools and accessories to get the job done properly.
A good DIY floor sanding kit is available online. It contains a chemical that will roughen the floor surface. However, it is easier to use than a buffer. You can use sawdust and white glue to make it yourself. Mix the mixture until it has a toothpaste-like consistency, and apply it to the floor. Don’t forget to wipe off the putty knife once you’ve finished.
Choosing a floor sander
When choosing a floor sanding and polishing Adelaide machine, many factors are to consider. Price, width, and duty cycle are all important factors. Remember that a floor sander’s value doesn’t necessarily lie in its price. It should be equipped with all the features you need for a job well done. Read on to find out how to choose the best floor sander and polishing machine.
Sandpaper must match the grit rating of your flooring. Otherwise, you risk wearing down your laminate floor faster than you planned. For laminate floors, you will need sandpaper with a grit rating between 320 and 600. Carpets and vinyl floors use grit ratings of 120 to 320. Higher grits will result in better results and higher resistance to scratches.
Choosing a floor polisher
The process of choosing a floor polisher is quite daunting. Many different types and varieties are available, and suppliers always strive to create attractive models. The type of floor you have will determine the machine you need. Another consideration is how often you will polish your floor. For example, a high-traffic area might need a polisher with a deep-coverage disc. Conversely, a low-traffic area might only need polishing once or twice a year.
Getting free quotes
To find the best value for money, you should get free quotes for floor sanding and polishing Adelaide services. These estimates should include the type of finish you would like and references from previous customers. While you may be tempted to go for the cheapest quote, paying more for a reputable company is always better. Prices differ depending on your location and market forces. Getting three free quotes is a good idea if you are unsure of the exact cost of the service you need.
Preparation for sanding
Before sanding your floor, you’ll want to remove any floor covering. It is the perfect time to remove staples and apply a new stain. You’ll also need to purchase the necessary sandpaper. The most effective sandpaper is 40 grit. This course-grade sandpaper sands the surface down at a 45-degree angle across floorboards.
Cost of sanding
When determining the price for floor sanding and polishing, consider how many square feet you have and what type of finish you want. You also want to inquire about previous work, such as references. It would help if you did not always opt for the lowest bid; paying a little more for a good company is more worthwhile than skimping on quality. Price will vary according to the local market, and you can compare up to three free quotes from contractors in your area.